The Honda EU2000i Generator will easily run the 60 Amp ProCharge Ultra Battery Charger,
making it the perfect Battery Charger to pair with your SeaMaker 20 or 30 water maker and Honda Generator. 

We have looked and a you simply won't find a more feature packed Battery Charger for the money,
which is why we have one aboard THIRD DAY.



12v/24v ProCharge Ultra Battery Chargers

Available in Amp ranges from 10A to 60A

  • Global Input Power- This battery charger will operate anywhere in the world! By design, this battery charger will automatically operate with an a/c input of 90-260 volts  (40-80 hz) automatically.
  • 11 Pre-programmed battery charge curves, including LiPO4, GEL, AGM, Calcium,  and Flooded Lead Acid Batteries.
  • One custom, user programmable battery charge profile. Can be set from the charger, no need for a computer.
  • Four Step Battery Charging Profile extends the life of your batteries by ensuring a full charge & conditioning, as well as entering a float mode when charging is complete to protect against overcharging your batteries.
  • One common negative, three positive battery posts allows the user to charge 1, 2 or 3 battery banks.
  • Two Digital Meters displaying real time current and voltage measurements.
  • One power meter showing % of charger capacity being used as well as power capacity remaining.
  • Active Power Factor Correction (PFC)- up to 0.99pf, ensuring efficient power conversion, increasing efficiency by nearly 40% over older, non-PFC technology.
  • Synchronized rectification output increases the efficiency of this charger up to 10% over traditional diode based chargers found on the market today.
  • High Voltage de-sulfation cycle for customers with flooded lead acid batteries (Equalization Mode).
  • Low activity, stand-by mode to increase battery life.
  • Digital Microprocessor Controlled High Voltage Protection System (Primary) and an emergency backup analog controlled high voltage trip (secondary)
  • Constructed of non-ferrous metals and marine grade materials. Lightweight, Compact footprint for easy installation.
  • Designed and built to UL1236 Marine & ABYC-31 standards.
  • 32 LED Information Panel, internal scan and systems check.
  • Remote port for optional remote control w/ 10 meter cable. Remote can be surface, flush, or recess mounted.
  • Battery temperature sensor included.


Download ProCharge Ultra Technical Summary Sheet

Download ProCharge Ultra Manual

  • Technical date is for the 12v 60 amp model, all other units prorated accordingly
  • Input voltage range 90-270 v 40-70 hz
  • Power Factor at 230 v 0.976
  • Efficiency 89.4%
  • Full load current (110/230v) 9.8/4.6
  • Ripple noise (R.M.S.) 14mv
  • Ground leakage 0.5 ma
  • Generator/ mains power required to run unit (watts)
  • 12 v 20 amp approx 300 watts
  • 12 v 30 amp approx 450 watts
  • 12 v 40 amp approx 600 watts
  • 12 v 50 amp approx 750 watts
  • 12 v 60 amp approx 900 watts
  • 24 v 20 amp approx 600 watts
  • 24 v 30 amp approx 900 watts
  • volt meter accuracy +/- 1%
  • amp meter accuracy +/- 1%

Optional Remote Display and Control Panel




Please call 619-609-3432 or email us to purchase a ProCharge Ultra Battery Charger until we get this item added to our shopping cart.


ProCharge Ultra Battery Chargers
Model Info and Pricing


  Model   Volt and Amp
Output 
Charger Size
L x W x H
in Inches

Weight
in pounds
Number
of Charge
  Outputs  

Input
watts
 Cost  
 PCU1210 12v 10 Amp  10.5 x 8.5 x 3.75  5.2
 2 150 $199
 PCU1220 12v 20 Amp 10.5 x 8.5 x 3.75  5.2
  3  300  $299 
 PCU1230 12v 30 Amp 10.5 x 8.5 x 3.75  5.2
  3  450 $329
 PCU1240 12v 40 Amp 10.5 x 8.5 x 3.75  5.7
 3 600  $359 
 PCU1250 12v 50 Amp 12.5 x 8.5 x 3.75 7.7
 3 750 $399
 PCU1260 12v 60 Amp 12.5 x 8.5 x 3.75 7.7
 3 900  $449 
PCU2420 24v 20 Amp 10.5 x 8.5 x 3.75 5.7 3 600 $418
PCU2430 24v 30 Amp 12.5 x 8.5 x 3.75 7.7 3 900 $449
PCUR Remote Control 4.3 x 2.7 x 0.8 0.1 NA NA $63