We can build a Custom Water Maker to fit your specific application
Or
We can Retrofit your existing water maker with Non-Proprietaty Parts

    We have the experience and expertise to build a custom water maker to suit your specific application or installation needs.  Here are a few examples of some recent projects.


    This client only had room for 3 horizontally mounted 21" RO Membranes


      A client needed the controls mounted right on his pressure vessels and due to space considerations needed the RO Pressure Vessel assembly to be mounted vertically on his engine room bulkhead.



    MV Discovery is a 46ft Nordhavn cruising power boat
    that was looking to update their Village Marine water maker.
    We worked with them to replace their RO Membranes and Pressure Vessels
    and increased their fresh water production by 8 GPH, while getting them away from the proprietaty and high priced Village Marine Membranes.
    They talk about the retrofit on their Blog



    We work with clients all the time who either already have some water maker
    parts or even a working water maker to complete or upgrade their current system.  The client in the below photos was not happy with the performance
    or output of his Spectra water maker.  Reusing some of his Spectra parts to save costs, we were able to turn his low output DC water maker
    into a 30 gallon per hour 120v AC high output water maker.


    The original black Spectra RO Pressure Vessels and Membrane now mated to our high flow stainless steel and robust piston pump.






    Call Rich 7 Days-A-Week
    to talk about building a
    Custom water maker or retrofitting your
    current water maker.
    619-609-3432



    Custom Panel with Additional 3-way product water valve for selecting
    Starboard or Port Water tank.




    A client wanted a single 21" x 4" RO Membrane with the control panel mounted right on the RO Pressure Vessel in a vertical orientation to fit into his hanging locker




    PUR80 Pressure Vessel
    and Membrane Retrofit

    We do a RO Pressure Vessel retrofit like this several times a month.  The client was tied of paying the ridiculously high prices for the proprietary RO Membrane replacements, so he installed a new RO Membrane and Pressure Vessel.

    Original PUR80 Installation



    Proprietary PUR80 Membrane and Vessel
    Replaced with our Standard
    21" RO Membrane Retrofit





    We have the ability to manufacture custom
     control panels for one of our
    standard or Custom water makers



    Not everyone can find room for a 40" RO Pressure Vessel on their boat, so this Cruiser had us build his water maker with two 21" RO Membranes plumbed in series.  With the Pump and motor combination of our standard SM20, the two smaller membranes will produce 16-17GPH.