Water Maker Components
| Cruise RO Water and
Power can trace its beginnings to the
company's founder and owner building his own high output
watermaker as Rich was preparing to take his family cruising aboard SV
THIRD DAY. So we don't look down on cruisers that want to build their
own water maker as a way to save money or just because they can; we support them. In addition to providing complete water maker systems, we also sell individual water maker components for cruisers looking to build their own water maker or to retrofit and upgrade their existing water maker. Our fully assembled water maker modules can be purchased individually or we use our volume buying power to pass along savings on raw major water maker components such as: RO Membranes, RO Pressure Vessels, High Pressure Pumps, Electric Motors, Prefilter Housings, and some of the other parts that we have on our shelves that go into our units. Below is the pricing for our fully assembled modules along with our raw water maker components. If you have a specific request but don't see it listed, just contact us via email, Skype or by phone and we will be happy to provide you a price quote on any of the parts we use in the assembly of our SeaMaker water makers. Fully Assembled Module #1A 1.6GPM General Pump Company Stainless Steel Triplex Plunger Pump coupled to a 1.0Hp Leeson Motor Price $1417 (Note:the electrical box is now on the same side as the Hp Pump head)  Fully Assembled Module #1B 2.3GPM General Pump Company Stainless Steel Triplex Plunger Pump coupled to a 1.5Hp Leeson Motor Price $1535 (Note:the electrical box is now on the same side as the Hp Pump head)  Fully Assembled Module #1C A General Pump Company Stainless Steel Triplex Plunger Pump coupled to an electrically engaged 12vVDC dual v-belt clutch. Pump available in flow rates of: 0.5, 0.8, 1.0, 1.6, 2.3, 3.0, 3.6, and 4.2GPM Price $1417 (Note:the pressure relief valve as shown in photo is not included for the listed price, but is available)  Module #1D: General Pump Company Stainless Steel Triplex Plunger Pump Gallon per minute flow rates available in 0.5, 0.8, 1.0, 1.6, 2.3, 3.0, 3.6, and 4.2GPM with C-face mounting flange included Price $1025   Module #1E 1.0Hp Leeson TEFC Motor dual 115v or 220v Price $395  Module #1F 1.5Hp Leeson TEFC Motor dual 115v or 220v Price $415 (Photo Pending) Fully Assembled Module #2A One 40" x 2.5" high salt rejection RO Membrane housed in Spiral Wound Fiberglass Pressure Vessel fitted with fiberglass mounting feet and stainless steel clamps. The three water connections (Sea water inlet, Brine outlet and Product water outlet are all 1/4" Female NPT fittings. Price $735 (Note: no end fittings provided)  Fully Assembled Module #2B Two 40" x 2.5" high salt rejection RO Membrane housed in two Spiral Wound Fiberglass Pressure Vessel fitted with fiberglass mounting feet and stainless steel clamps. Plumbed in series with 1/4" stainless steel tubing. The three water connections (Sea water inlet, Brine outlet and Product water outlet are all 1/4" Female NPT fittings) Price $1495 (Note: no inlet and outlet lines provided)  Module #2C RO Pressure Vessel for a standard 2.5"x40" RO membrane with Anodized Aluminum end plugs and retaining clamps. Sea water inlet, Brine outlet and Product water outlet are all 1/4" Female NPT fittings. Price $425  Module #2D RO Pressure Vessel for a standard 2.5"x21" RO membrane with Anodized Aluminum end plugs and retaining clamps. Sea water inlet, Brine outlet and Product water outlet are all 1/4" Female NPT fittings. Price $375 (Photo Pending)  Module #2E 2.5" x 40" RO Membrane used in our Cruise RO Water water makers as well as a direct replacement for many water maker brands such as Spectra and Eco Tech. DOW Filmtec SW30-2540 Spec Sheet Link Price $187  Fully Assembled Module #3A Dual Standard 10" Filter housings with mounting bracket and 1/2" female NPT inlet/outlet ports and accepts the standard 9.75" x 2.5" filter elements This unit can be used as prefiltering for your water maker or as a dock water filtering unit with a 5 micron and activated carbon filter. Price $65  Module #3B Industry Standard 10" Filter Housing with clear sump and 1/2" female NPT inlet/outlet ports Accepts the standard 9.75" x 2.5" filter elements Price $20 (Pending Photo) |
