SM30 - 50Hz AC Version

SeaMaker 30 Gallon per hour Water Maker

Our best-selling water maker

$5,050 (SM30S) Simple Version with no remote control panel
$5,250 (SM30S-50Hz) Simple Version with no remote control panel
$5,550 (SM30) AC Version
$4,850 (SMDC-33) DC Version
$5,750 (SM30-50Hz) AC Version

SEE SIMPLE VERSION DETAILS HERE

SEE DC VERSION DETAILS HERE

What’s Included:

  • High Pressure Pump and Motor Assembly (dual voltage 115VAC/220VAC)
  • RO Pressure Vessel Assembly
  • Pre-filter and Boost Pump Assembly
  • Valving and Cleaning Assembly
  • Remote Control Panel

SEE DETAILS BELOW

  • High Pressure Pump and Motor Assembly (12VDC, 220VAC, 115VAC,  48VDC or 24VDC)
  • RO Pressure Vessel Assembly
  • Pre-filter and Boost Pump Assembly
  • Valving and Cleaning Assembly
  • Remote Control Panel

SEE SIMPLE VERSION DETAILS HERE

  • High Pressure Pump and Motor Assembly (12VDC, 24VDC or 48VDC)
  • RO Pressure Vessel Assembly
  • Pre-filter and Boost Pump Assembly
  • Valving and Cleaning Assembly
  • Remote Control Panel

SEE DC VERSION DETAILS HERE

Optional Upgrades:

  • Remote-Control Panel with TDS Meter (+$200)
  • 120VAC Boost pump option available using 1.5Amp (+$200)
  • 24VDC Boost pump is available using 6.5Amp (+$200)
  • Valving & Cleaning Panel (+$350)
  • Automatic Fresh Water Flush ($649)

WHY THE SM30 IS OUR BEST SELLING WATER MAKER

50% more fresh water Production.

SM30 adds a second 40 RO membrane – one to produces 20GPH while membrane two adds an additional 13GPH. This gives you over a 50%  increase in fresh water production for the exact same power usage, generator run time, and support equipment.

Redundancy

If one of the two RO membranes were to fail you can easily re-plumb and run the unit on a single RO membrane and continue along with a 20GPH  water maker until you get a replacement RO membrane.

Relative Cost adder over the SM20

The price difference between the SM20 and SM30 is $900. This minimal increase in cost will get you over 50% more fresh water production along with the redundancy feature of having two independent membrane 

 

FEATURES

AC ModelFresh Water Prod.
GPH/GPD
High Pressure Pump Amps 120/220V ACBoost Pump
Amps 12VDC
Price
SM3033/7909.3/4.88.2$5550
SM30-50Hz30/72012.8/6.4 (110-220v)8.2$5750
Simple ModelFresh Water Prod.
GPH/GPD
High Pressure Pump Amps 120/220V ACBoost Pump
Amps 12VDC
Price
SM30S30/7209.3/4.88.2$5050
SM30S-50Hz30/72012.8/6.4 (110-220v)8.2$5250
DC ModelFresh Water Prod.
GPH/GPD
High Pressure Pump Amps 12V/24V/48V DCBoost Pump Amps 12VDCPrice
SMDC3333/79080/40/208.2$4850
 

INCLUDED

High Pressure Pump and Motor Assembly
One General Pump Company triplex plunger pump with a 316 stainless steel manifold and wetted parts, solid ceramic plungers and a nickel-plated crankcase for anti-corrosion mechanically coupled to a 1.0Hp 120/220VAC electric motor. Fitted with a pressure relief valve preset to 1000 PSI. Inlet and outlet fittings supplied and installed on pump.

RO Pressure Vessel Assembly
Two filament wound fiberglass/epoxy pressure vessel.
Two SW30-2540 Dow Filmtec Polyamide thin-film composite high salt rejection RO Membrane (The Gold Standard in RO Membranes, not a discount off-brand)
Four fiberglass clamps affixed to fiberglass mounting feet, two per pressure vessel

Pre-filter and Boost Pump Assembly
Two 10” clear filter housings with mounting brackets
One 20-micron pre-filter element
One 5-micron pre-filter element
One self-priming 12V DC variable speed Jabsco boost pump
(Also available in120VAC and 24VDC)

Valving and Cleaning Assembly
One clear filter housing with mounting bracket
One activated carbon filter element
Two 3-way valves for selecting:

  1. normal operation of inlet seawater
  2. fresh water rinse from ships tanks
  3. or pickling solution from 5-gallon bucket

Remote Control Panel
An anodized aluminum panel with the following system controls:
One hour meter (Standard)
One 0-1 GPM flow meter
One 0-1500 system pressure gauge
One 0-60 boost pressure gage
One product water selector non-blocking 3-way valve
One stainless steel pressure regulating needle valve One 12VDC boost pump electrical switch
One 120VAC high pressure pump electrical switch One boost Pump pressure gauge

Replaces standard hour meter with on-panel real-time TDS meter display ($200 adder)

30ft of green 1/2″ Polyethylene sea water tubing 30ft of blue 1/4″ Polyethylene product water tubing 40ft of red 1/4″ Polyethylene brine water tubing
10ft of Orange 3/8″ Polyethylene pickling water tubing One cutter for the water tubing
Locking clips for all push connector fittings
Electronic copy of the Installation, Operation and Maintenance manual via USB Stick (Hard Copy available at our cost of $23)
One filter housing wrench for filter element replacement
One container of high-pressure pump oil
2.5 pounds of pickling reagent
One hand-held TDS meter for checking water quality (not included with control panel mount TDS meter)
A baggy of assorted push-to-connect fittings to aid in installation

One 3ft long 3/8″ high pressure braided stainless steel silicone covered hose for connecting the high-pressure pump outlet to the RO pressure vessel.
One 5ft 3/8″ high pressure braided stainless steel silicon coated hose 
Longer or shorter high-pressure hoses available for an additional $10 per foot.

 

DIMENSIONS

The below table provides the length, width, height, and weight of the various water maker modules. The listed dimensions represent the greatest size measurement to create a box that the module can be contained within. However, as can be seen in the module photo images, the modules could actually fit into a smaller space depending upon the installation orientation. These dimensions do not include the room needed for wires or hoses to enter or exit the equipment. All equipment comes with straight fittings. Optional 90-degree fittings are available.

ModuleLength
(inches)
Width
(inches)
Height
(inches)
Weight
(pounds)
Pump and Motor189848
RO Pressure Vessel4510630.5
Prefilter Assembly13.759.7555.2
12V DC Boost Pump9.5577
Valving and Cleaning Assembly13.5514.55
Remote Control Panel Depth protruding from back of panel3.5 Depth1111.254.75
Remote Control Panel (Standard Hour Meter)
Depth protruding from back of panel
2.875 Depth1111.254.5
Optional: Automatic Fresh Water Flush ($649)9.75843
Optional: Valving & Cleaning Panel ($350)5.5 (depth)6.2511.251.5

* Please notify us if you plan a 220VAC installation so we can change the standard 120VAC electrical switch for the high-pressure pump motor in your remote panel.
*Please notify us if you plan a 24VDC installation so we can change the standard 12VDC electrical switch for your boost pump in your remote panel.
* Standard Boost pump is a 12VDC self-priming pump.
(Here is a link to a Video we made explaining why we like the 12V DC pump)
* A 120VAC Boost pump option available using 1.5Amp $200 Adder
* A 24VDC Boost pump is available using 6.5Amp $200 Adder

 

NOT PROVIDED

Watch the video to the right going over the details

Summary of What You Need to Supply
Raw water through hull and shutoff valve
Raw water sea strainer (we recommend one like this)
Electrical installation wire and breakers for the AC and DC Pumps Mounting screws and bolts for the individual system modules
Zip ties and mounting straps for securing the electrical and water lines That’s it! Everything else we provide with the with the water maker.

Questions? We Are Here To Help.

Email or call and talk to the owners of the Company and the Designers, Rich and Charlie, 7 Days-A-Week. If they are awake, they answer!

EMAIL

SALES & TECH SUPPORT

MANUFACTURING & SHIPPING

SKYPE

WHATSAPP