SeaMaker 40 Gallon per hour Water Maker
$5,400 (SM40S) Simple Version with no remote control panel
$5,900 (SM40) AC Version
$4,850 (SMDC-33) DC Version
$6,100 (SM40-50Hz) AC Version
What’s Included:
- High Pressure Pump and Motor Assembly (dual voltage 115VAC/220VAC)
- RO Pressure Vessel Assembly
- Pre-filter and Boost Pump Assembly
- Valving and Cleaning Assembly
- Remote Control Panel
SEE DETAILS BELOW
- High Pressure Pump and Motor Assembly (12VDC, 220VAC, 115VAC, 48VDC or 24VDC)
- RO Pressure Vessel Assembly
- Pre-filter and Boost Pump Assembly
- Valving and Cleaning Assembly
- Remote Control Panel
- High Pressure Pump and Motor Assembly (12VDC, 24VDC or 48VDC)
- RO Pressure Vessel Assembly
- Pre-filter and Boost Pump Assembly
- Valving and Cleaning Assembly
- Remote Control Panel
Optional Upgrades:
- Remote-Control Panel with TDS Meter (+$200)
- 120VAC Boost pump option available using 1.5Amp (+$200)
- 24VDC Boost pump is available using 6.5Amp (+$200)
- Valving & Cleaning Panel (+$350)
- Automatic Fresh Water Flush ($649)
FEATURES
| AC Model | Fresh Water Prod. GPH/GPD | High Pressure Pump Amps 120/220V AC | Boost Pump Amps 12VDC | Price |
|---|---|---|---|---|
| SM40 | 43/1032 | 13.5/6.8 | 8.2 | $5900 |
| SM40-50Hz | 40/720 | 17.2/8.6 (110-220v) | 8.2 | $6100 |
| Simple Model | Fresh Water Prod. GPH/GPD | High Pressure Pump Amps 120/220V AC | Boost Pump Amps 12VDC | Price |
|---|---|---|---|---|
| SM40S | 40/720 | 13.5/6.8 | 8.2 | $5400 |
| DC Model | Fresh Water Prod. GPH/GPD | High Pressure Pump Amps 12V/24V/48V DC | Boost Pump Amps 12VDC | Price |
|---|---|---|---|---|
| SMDC33 | 33/790 | 80/40/20 | 8.2 | $6450 |
INCLUDED
One General Pump Company triplex plunger pump with a 316 stainless steel manifold and wetted parts, solid ceramic plungers and an anodized aluminum crankcase mechanically coupled to a 1.5Hp 120/220VAC electric motor. Fitted with a pressure relief valve preset to 950 PSI. 50Hz units are fitted with a 1.5Hp 120/220V motor.
Two filament wound fiberglass/epoxy pressure vessels
Two Dow Filmtec Polyamide thin-film composite high salt rejection RO Membranes
Four fiberglass clamps affixed to fiberglass mounting feet, two per pressure vessels
Two 10” clear filter housings with mounting bracket
One 20 micron pre-filter element
One 5 micron pre-filter element
One self-priming 12V DC Jabsco boost pump
(Also available in120VAC, 208-240VAC, and 24VDC)
One clear filter housing with mounting bracket
One activated carbon filter element
Two 3-way valves for selecting: normal operation of inlet seawater, fresh water rinse from ships tanks, or pickling solution
(Not included with the SeaMaker Simple units -S)
An anodized aluminum panel with the following system controls:
One Hour Meter (Standard) + One 0-1 GPM flow meter
One 0-1500 system pressure gauge
One 0-60 boost pressure gage
One product water selector non-blocking 3-way valve
One stainless steel pressure regulating needle valve One 12V DC boost pump electrical switch
One 120V AC high pressure pump electrical switch One boost Pump pressure gauge
Replaces standard hour meter with on-panel real-time TDS meter display ($200 adder)
Replaces standard hour meter with on-panel real-time TDS meter display ($200 adder)
30ft of green 1/2″ Polyethylene sea water tubing 30ft of blue 1/4″ Polyethylene product water tubing 40ft of red 1/4″ Polyethylene brine water tubing
10ft of Orange 3/8″ Polyethylene pickling water tubing One cutter for the water tubing
Locking clips for all push connector fittings
Electronic copy of the Installation, Operation and Maintenance manual via USB Stick (Hard Copy available at our cost of $23)
One filter housing wrench for filter element replacement
One container of high-pressure pump oil
2.5 pounds of pickling reagent
One hand-held TDS meter for checking water quality (not included with control panel mount TDS meter)
A baggy of assorted push-to-connect fittings to aid in installation
One 5ft 3/8″ high pressure braided stainless steel silicon coated hose
One 3ft long 3/8″ high pressure braided stainless steel silicone covered hose for connecting the high-pressure pump outlet to the RO pressure vessel.
Longer or shorter high-pressure hoses available for an additional $10 per foot
DIMENSIONS
The below table provides the length, width, height, and weight of the various water maker modules. The listed dimensions represent the greatest size measurement to create a box that the module can be contained within. However, as can be seen in the module photo images, the modules could actually fit into a smaller space depending upon the installation orientation. These dimensions do not include the room needed for wires or hoses to enter or exit the equipment. All equipment comes with straight fittings. Optional 90-degree fittings are available.
| Module | Length (inches) | Width (inches) | Height (inches) | Weight (pounds) |
|---|---|---|---|---|
| Pump and Motor | 19 | 9 | 8 | 54 |
| RO Pressure Vessel | 45 | 10 | 6 | 30.5 |
| Prefilter Assembly | 11.5 | 5 | 14.5 | 6.5 |
| 12V DC Boost Pump | 9.5 | 5 | 7 | 7 |
| Valving and Cleaning Assembly | 13.5 | 5 | 14.5 | 5 |
| Remote Control Panel (Standard Hour Meter) Depth protruding from back of panel | 5 Depth | 11 | 11.25 | 4 |
| Optional: Automatic Fresh Water Flush ($649) | 9.75 | 8 | 4 | 3 |
| Optional: Valving & Cleaning Panel ($350) | 6 (depth) | 6.25 | 11.25 | 1.5 |
* Please notify us if you plan a 220VAC installation so we can change the standard 120VAC electrical switch for the high-pressure pump motor in your remote panel.
*Please notify us if you plan a 24VDC installation so we can change the standard 12VDC electrical switch for your boost pump in your remote panel.
* Standard Boost pump is a 12VDC self-priming pump.
(Here is a link to a Video we made explaining why we like the 12V DC pump)
* A 120VAC Boost pump option available using 1.5Amp $200 Adder
* A 24VDC Boost pump is available using 6.5Amp $200 Adder
NOT PROVIDED
Watch the video to the right going over the details
Summary of What You Need to Supply
Raw water through hull and shutoff valve
Raw water sea strainer (we recommend one like this)
Electrical installation wire and breakers for the AC and DC Pumps Mounting screws and bolts for the individual system modules
Zip ties and mounting straps for securing the electrical and water lines That’s it! Everything else we provide with the with the water maker.
Questions? We Are Here To Help.
Email or call and talk to the owners of the Company and the Designers, Rich and Charlie, 7 Days-A-Week. If they are awake, they answer!
SALES & TECH SUPPORT
MANUFACTURING & SHIPPING
SKYPE